Showing posts with label requirements. Show all posts
Showing posts with label requirements. Show all posts

RURAL DEVELOPMENT DEPARTMENT PROVIDING AMBULANCE ROADS TO LOCAL STRETCHES WHERE (PMGSY) COULD NOT BE AVAILABLE MUST HAVE MINIMUM MODULUS OF SUBGRADE REACTION, UNDER SURFACE.

Rural development department is doing development through road net work for the villages and sub villages where the PMGSY is not being constructed by the department of HPPWD , as people are compelling to their representatives for doing  needful under the provision made by the RD department, but it is regretted to point the various shortcomings in the said road net work connectivity where curves are not properly designed and grades of the roads are not being maintained ruling gradients more over there is no appropriate provision of the cross drainage works in said roads of the emergency duty declared as the Ambulance roads. As for the road pavement is concerned the department of Rural development maintaining Ambulance roads as concrete roads, where it is very necessary to have good solid foundation of well consolidated and non -absorptive materials under the concrete road and a concrete slab, being a rigid type of construction, however loose boulder stones are laid on the road surface, liable to crack over a yielding and flexible base when loaded. The load carrying capacity of a concrete road structure lies mainly in the structural rigidity of the slab and the uniformity of the subgrade support. It is therefore necessary to prepare the base in such a way that the concrete slabs are supported as uniformly as possible. Subgrade failure is a common cause of cracking and subsequent tilting or disruption of the slabs. As such base, sub base, or subgrade together act as a unit for supporting the concrete pavement, where it is necessary to follow the foundation under concrete pavement. The width of the base should project out at least 30 cm beyond the proposed edge of the concrete slab if kerbs are not set on the slabs. The base under the concrete pavement must be properly levelled, hollow patches filled up and consolidated with hard core, cambered and cross falls or longitudinal slopes must be given and there should be no soft spots present either in the base or the subgrade. For concrete pavement the minimum modulus of subgrade reaction of the under surface obtained with a plate bearing test should be 5.5 kg /cu.cm, where the type of the soil in the formation of the road is of this quality, no intermediate sub grade need be provided. The top 15 cm should be thoroughly compacted at the minimum moisture content to the exact profile of the road. Where the natural subgrade is weak but it doesn't consist of highly expansive soil, such as black cotton soil, the thickness of the consolidated base need not be more than 15 cm. Where lime -puzzolana concrete or lean concrete is proposed to be used, the thickness then may be only 10 cm. 10 cm thick concrete slabs laid over 15 cm well consolidated existing WBM crust have been found adequate to stand an axle load of 8100 kg or single wheel load of 4100 kg, as the case may be:-- Er Fateh Chand Guleria, RTI welfare Association registered number HPCD 3552 Bilaspur Himachal pradesh phone number 9459334377

DESIGN OF HILL CURVES AND SAFETY MEASURES FOR PROVIDING PROTECTIVE RELIEF, REQUIRED TO AVOID ACCIDENTAL RISKS.

Road curves are mainly of two types--Horizontal curves and the vertical curves. A horizontal curve is a curve in plan provided to change the direction of an alignment, where as a vertical curve in elevation is provided at change of gradient. There are two classes of vertical curves (a) convex or summit curves and (b) concave or valley curves, also known as sag curves. The design of a summit curve is governed mainly by the sight distance, required to provide adequate visibility, unless the summit is so small, less than 0.90 mt, above the lowest point of the curve, as not to interfere with visibility. In practice a simple parabola curve is used instead of a circular arc for a vertical curve, which joins the two gradients gradually.when two slopes meet, the change from one to the other should be gradual. This is achieved by using a vertical curve to unite the two gradients. Simple curve is a single circular arc connecting two tangents whereas a compound curve is formed by two adjoining simple curves. Hair pin bends are circular curves with transition curves at each end. Compound circular curves can be provided instead of the hair pin bends, and it is necessary to follow design criterion required to adopted normally for the design of hair pin bends for which straight length between two successive hair pin bends should not be less than 60 mt minimum, excluding the length of circular and transition curves. In case of the village roads length of transition should not be less than 15 mt whereas superelevation in circular portion of the curve to be taken 1 in 10 however this can be reduced to 1 in 15 for light traffic roads.

WATER TREATMENT IS NECESSARY FOR HUMAN CONSUMPTION, AS REQUIRED FOR REMOVAL OF GERMS OF DISEASES, SOLID IMPURITIES, TASTE, ODOUR, COLOUR, IRON AND MINERAL SALTS ETC.

It has been observed and stated that water found in the nature is seldom, if ever, all pure and free from danger for human consumption and most water require treatment for the removal of germs of diseases, solid impurities, taste, odour, colour iron and the mineral salts, etc In general the treatment given to water is adjusted suitably to the characteristics of the raw water and the nature of impurities to be dealt with. The main treatment required for surface water is for:(1) Contamination (2) Corrosion;(3) turbidity, taste and colour; and for underground waters is for removal hardness and scale forming salts, corrosive salts and excess iron and the other minerals. Particular attention should be made to planning and lay out of water treatment works in such a way that its capacity may be enlarged without difficulty in future for any of population. The treatment works should be located as near the source of supply as possible. The various processes involved in the purification of water should have proper vision and treatment under the provision made and required for the storage,, penetration of sunlight in to water, screening, sedimentation, coagulation/flocullation, sterilisation and chlorination etc.

COMBINATION OF THE THEORETICAL KNOWLEDGE AND PRACTICAL APPLICATION MAY BRING QUALITY PERFORMANCE AND GOOD RESULTS, UNDER THE RTI AND RTS ACT ADJUDICATION.

Character building is required to be amalgamated with encouraging scientific temperament of the new era entrants joining the RTI and the RTS act adjudication, so that they may have full capabilities for accepting the challenges of the present  technological artificial intelligence based activities required for the both ways multi dimensional approach and empowerment under the law code manual prefixed by the Constitution of India, in this behalf for the aim and objective of good governance and accountability, which could not be denied to the common man for their dedicated inspiration to bring transparency and accountability in the administration as facing corruption in the system of day to day requirements. RTI activists and volunteers must have theoretical knowledge along with the practical application and experience required for the skill development of RTI promotion, as becoming a dynamic access to the information under RTI act adjudication where people must have abilities to face the First appellate authority and too the second appellate authority, responsible for the decision making and comments on the captioned subject matter deliberation required to be adjudicated under law code manual prefixed by the Constitution of India in this behalf. As such it is a life long learning and setting a bench mark of the work and conduct of the transformation of application and values required for the success of an individual working on the captioned subject matter deliberation required to be forward with the exposure of wrong assessment and wrong deal of cases informed by the public information officers on the bases of academic quality and dedication for the removal of corruption from the society and circle for which every citizen of the country is responsible to take cognisance of the such results and principles of the recognized commitments before the higher /highest platform given by the RTI and the RTS act adjudication, doing needful under law code manual prefixed by the Constitution of India, in this behalf, however very few people are talking cognisance of the vision and provision made for the operation of the leadership awards and recognition for the social service, where there is no exposure of the civil societies and NGOs, even every citizen of the country empowered for the aim and objective of the significant progress of this programme of the government particularly issued for the good governance and accountability in the administration, more so department of the administrative reforms and the DOPT too working for the welfare of society and circle under article 21 and 350 of the Constitution and doing needful under law code manual to improve the system for service by way of improvement of the work and conduct of such government officials and officers, acting against the norms of the Act and misleading the public welfare by way of the wrong deal of cases, incomplete information and the incorrect information, delaying the procedural compliance of the scheduled charters of the public informations even responsible for the reply of general correspondence with in a period of three months, under efficient time lines of the schedule given so for the disposal of correspondence made by the applicants, demanding free and fair justice from the system of governance , however not in a position to get timely information with in the schedule of RTI and the RTS guidelines, which is highly objectionable matter of fact and concern to be noticed by who and when? Er Fateh Chand Guleria, Director, RTI welfare Group, registered number HPCD-3552 , Bilaspur Himachal pradesh, Phone number 9459334377.

(HOD) OF THE RURAL DEVELOPMENT SHOULD PROVIDE SPECIALIST LITERATURE AUTHENTICATED WITH THE DESIGN RULES, AND APPLICABLE TO THE ALL STRUCTURES DESIGNED BY ANY METHOD.

RTI welfare Association Registered number HPCD 3552 , Bilaspur Himachal Pradesh taking cognizance of the Social audit where required necessary by the community people demanding their genuine rights and entitlements under law code manual prefixed by the constitution of India in this behalf.It is particularly mentioned here that the department of the Panchayati Raj Department and Rural development ignoring the fundamentals of design requirements, Recommendations as well as the Rules for implementation published in the working programmes and literature for the specified work and infrastructure related to the structural development and strength as per provision made by the code and specifications.It is also noticed during the course of social audit by the Society and Association that no completion certificates are issued by the department of Panchayati Raj and various schemes and works are kept incomplete because of the deviation and excess expenditure occured for which no revised DPRs prepared by the department which is highly objectionable matter of fact and concern to be noticed by the government however incomplete works remaining incomplete and no codal formalities accomplished by the department.As for the discrepancies noticed by the RTI welfare Association are concerned no thorough verification of facts placed on the records of the District Administration and the Programme officer cum BDO Concerned taking observation even written notes prepared for the improvement of such irregularities noticed by the RTI welfare Association.As for as the Social audit is concerned it is an awareness drive and building the participation of the community people in order to discuss the findings of the social audit with the people and the official however non compliance is a practice of the department responsible for the good governance and accountability. As for as the RTI evaluation and it's implementation is required to improve the shortcomings of the department and pertinent to the notice taken by the social audit report the programme officer has been declared responsible to provide the information as pointed out by the RTI welfare Association/Group however correspondence made by the group activities are kept pending and no cognizance taken for the improvement of the work and conduct of the schematic design and scope for which the HOD and the department of the RDD is responsible to issue related literature (Specialist) recommendations and pertinent to the general requirements grouped together with the design rules which are generally applicable to the all structures designed by the any method.

APPROACH FOR ACCESS TO INFORMATION

The RTI act publications and too the RTS act adjudication have been empowered to the citizens of country for taking cognizance of the encouraging involvement and setups for the purposeful interest areas of the discovery zone of related informations required to be verified by the RTI activists and Volunteers as well as the Resource persons in the light of study made for the good governance and accountability intervention to the benefits of the society and circle and bringing long time impact on the captioned subject matter deliberation required to be maintained by the government and too by the parliamentary democracy working for the good governance and accountability however interest areas leaving behind the success of the true discovery and development of the infrastructure related to the learning environment, ability to struggle for the good governance and accountability and transparency in administration,as well as sense of confidence and safety and success and control of the work and conduct under law code manual prefixed by the constitution of India in this behalf however ignoring the fact and concern even challenge before the FAA and SIC or CIC for which the government is responsible to take cognizance of the delay and dereliction of duty and follow disciplinary action against the defaulters however no required review and re-examine of cases at the level of the SIC and CIC even decision of the department of the administrative reforms organisation is a matter of sore grave concern as facing problems due to unusual practice of delay and denial of the informations asked with margin of reply under the RTI act publications and too the RTS act adjudication.A major issue that has percolated our system of governance and trial for work and conduct presumed innocent unless found guilty by a court of law and the courts are facing problems of pendency too list by way and virtue of which it is too necessary to follow the instructions and findings of the Commissions and do the needful however public authorities are taking no cognizance of the government instructions time to time issued for the good governance and accountability and ignoring the law code manual prefixed by the constitution of India which is not desirable at all as creating unnecessary hurdles to protect the fundamental rights of the citizens of country demanding free and fair justice from the system of governance.

SPACING OF EXPANSION JOINT FOR THE LONG STRUCTURES AND PROVISON MADE BY THE INDIAN STANDARDS OF THE CODES AND SPECIFICATIONS BASED ON THE DESIGN REQUIREMENTS/VALUES (RETAINING WALLS) .

Maximum spacing of the expansion joint shall be seventy five feet in case of the backfill entire length and may start from ten metres onwards to the total length of the Retaining wall however it depends upon the Footing design and scope of the structure to be isolated from the total length required for the entire length of the wall to be used by the study made on the captioned subject matter deliberation required to be verified under code for construction and design. 25 mm gap may be provided between the adjecent parts of the construction over the Footing designed for the structure of Retaining wall but it may be filled in case of variation in the data for design and development of structure differs at the different portions of the Retaining wall and may crack it on the vertical shear reforms required to be filled with the steel strip and the bitumen fillets mixed with the sand to resist the temperature variations during the expansion of material used for the reinfoced concrete wall .Special type of the modular expansion joints should be provided in case of the bridges having wide deck and the large span length involving complex movement/rotation .As for as the case of Retaining wall is concerned it may start from ten metres length onwards to seventy five feet of the length of the structure as for as the case of backfill entire wall length is concerned however the isolation of the structure differs on the basis of the footings developed by the study made under code for construction and design &Scope of the earth pressure and the bearing capacity of the soil including the angle of repose maintaining the shape and size of the structure designed for the site of work and it's utilities protected by the study made and created for the safety of structure by using factor of safety against the negative reoccurring of forces and effects due to temperature and weather changes

GENERAL NOTES ON THE DESIGN OF THE FOUNDATION (ISI)

The design of RCC footings and foundation is based on the assumption that the foundation is rigid so that the variation of pressure under the foundation will be linear .The distribution or pressure will be uniform if the centroid of the Footing coincides with the resultant of the applied loads .This conventional method holds good only in case of rigid foundation.Such an assumption becomes less and less accurate as the Footing become relatively more flexible.The requirements in design of foundation are (1) The pressure on the soil should not exceed the bearing capacity of the soil .(2) The settlement of the structure should be with in the permissible limits .Further there should be no differential settlement.Whenever the possibility of the differential settlement occures, the different portions of the structure should be made such as to settle independently of each other and where the bearing capacity of soil is low, RCC continues footings are provided and the footings shall be designed to sustain the applied loads, moments and forces and the induced reactions and to ensure that any settlement which may occur shall be as nearly uniform as possible and the safe bearing capacity of soil is not exceeded .In case of the sloped and stepped footings the effective cross section in compression shall be limited by the area above the nuetral plane and the angle of slope and the depth and location of steps shall be such that the design requirements are satisfied at every section sloped and stepped footings that are designed at a unit shall be constructed to assure action as a unit .

ALL REINFORCEMENT SHALL BE FREE FROM LOOSE MILL SCALES, LOOSE RUST AND COATS OF PAINTS ,OIL ,MUD OR OTHER COATINGS WHICH MAY DESTROY OR REDUCE BOND AND THE MODULUS OF ELASTICITY OF STEEL SHALL BE TAKEN AS 200 kN /SQUARE MM

ASSEMBLY OF REINFORCEMENT:-- In the case of straightening, cutting and bending, reinforcement shall be bent and fixed in accordance with the procedure specified in IS:2502-1963 and shall not be straightened in a manner that will injure the material.(2) All reinforcement shall be placed and maintained in the position shown in the Drawings approved by the competent higher authority.(3) Crossing bars should not be tack - welded for assembly of reinforcement unless permitted by the Engineer incharge.(4) As regards tolerance on placing of reinforcement, unless otherwise specified by the Engineer incharge reinforcement shall be placed with in the following tolerance.(a) For effective depth 200 mm or less plus minus ten mm and  in case of more than 200 mm it should be plus minus fifteen mm .The cover in no case shall be reduced by more than one third of the specified cover or 5mm which ever is less .(5) In case of the welded joints and mechanical connections reinforcement may be used  but in all cases of important connections,tests shall be made to prove that the joints are of the full strength of the bars connected . Welding of reinforcement shall be done in accordance with the recommendations of the IS :2751 -1966 and the Indian Standard recommendations for welding cold worked steel bars for reinforced concrete construction.(6) Where reinforcement bars are bent aside at construction joints and afterwards bent back in to their original position,care should be taken that at no time is the radius of the bend less than 4 bar dia for plain MS or 6 bar dia for deformed bars . Care shall also be taken when bending back bars , to ensure that the concrete around the bar is not damaged .

IRC RECOMMENDATIONS SUGGEST THE PARKING PLACES AND LAY -BYS ON THE IMPORTANT ROADS

Indian road congress recommend that the Lay - byes should be provided on the important roads at intervals to enable vehicles to draw off the road for temporary parking required for break downs and the repairs. Bays should also be provided for the bus stops.These should normally be 3 meters wide and al least 30 meters long with 15 meters end tapers on both sides .The parking at open places must have a gross area of about 23 square meters as required for each car parking , this makes due allowance for access roads irregularities in manoeuvring and opening of the doors.Parking lane width for parking parallel to the road kerbs should be 3 meters and it may be reduced to 2.5 meters where available space is limited .Where sufficient carriage way width is available, angle parking must be provided and for parking either diagonally or at the right angle to the kerb a width of at least 6 meters is needed . As required for the parking of individual trucks 3.75 into 7.50 meters area is necessary and in the case of Cars 3 into 6 meters parking space is required and parking lots for Community parking it may be 2.5 into 5 meters .

PROJECT ESTIMATES MUST HAVE PROPER ALIGNMENT AND THE PROVISION OF WAY SIDE EMENITIES

The road project estimates should contain the following information. REPORT:-- The Report should be brief but full of the important information which must be related to the survey conducted and must outline:-- Previous history of the road if any existing,or history of the proposal of the road ,it's present condition, topographical and the geological features, possible future developments of the sorrounding areas of the road ,rainfall and floods etc It is necessary to give the details of the proposed alignment,it's special features and justification for the selection of the Particular alignment.Necessity for any heavy banks or cutting proposed and why these could not be avoided . Details of gradients and curves with radii and where they are in any way unusual. Sight distance and the corresponding provisions made at horizontal and the vertical curves .Formation width with relations to the existing and future traffic. Land widths to the acquired, permanent and temporary acquisitions. Details of the masonry structures required to be built-- Bridges , culverts, causeways , drainage, Retaining walls ,Rest houses , boundary walls for which separate sub estimates should be prepared for the welfare of society and circle to follow future semblance of the provision made and created for the development of the areas covered by the road survey and alignment finalised by the department concerned

ADMINISTRATIVE REFORMS HAVE BECOME NECESSITATED NECESSITY OF THE LAW CODE MANUAL AS WRONG INTERPRETATION CHALLENGEABLE UNDER LAW BEFORE THE FAA , SIC or CIC AND THE COURTS, ALLOWED UNDER RTI

The prescription of Laws ,rules and procedures are, in the general passage of requirements by human rights and the obligation ingenuity invariably renders it difficult to make it in to law , provision for all conceivable eventualities and lack of precision make it difficult for which the strict adherence to the letter of Law on the other hand invites understandable criticism of rigidity , unresponsiveness ,even heartlessness .Under these circumstances, limits and safeguards have to be provided enabling implementation of policies and programmes with sufficient creativity but without too much scope for misjudgements,doubts and suspicion. What is required perhaps is the framing of rules and procedures with a for greater attention to detail, verification that the law and rules are often also interpretated and implemented by comparatively low skilled public servants for which the accountability of Admininistration is the guarantor of the limits and safeguards for which the RTI act publications and too the RTS act adjudication have been empowered to the citizens of country for proper enforcement of the law code manual prefixed by the government and the Constitution of India however it is necessary to protect the fundamental rights by challenging and filing the due course of action under law failing which one may have to face the consequences as required for the modification and system to change with the provision made by department of the Administrative reforms where such Complaints may be referred by the Applicants under law code manual prefixed by the government in this behalf of the redressal of grievances or follow court of law and rules

HYDRATION IS THE BALANCE OF ELECTROLYTES SUCH AS SODIUM AND THE WATER IN THE BODY, DRINK WHEN REQUIRED BY THE BODY.

Actual demand of body to drink how much water per day depends upon the various factors such as body size ,age factor, out door temperature and how hard work is done by the body as well as sweating will determine how much water is actually needed by the body .More is the weight of the body will definitely require more water to drink as compared to the normal and the lesser ones for which if one is working under the tremendous condition of temperature in the higher temperatures definitely demand more quantity of the drinking water in comparison to the  person sitting in the office in a temperature controlled device. As such it also depends upon the health of body maintained for most young, healthy people, the best way to stay hydrated is simply to drink when one is thirsty, those who are older in the age of senior citizens above sixty five may need to pay more attention to getting sufficient fluids because the thirst sensation can decrease with the age factor. Water is a better choice than less healthy options of fruits juice and the sodas but when it comes to hydration any beverage can add water to the body system .One can also get water from the food choices, like fluide rich foods, meals such as fruits, vegetables, soups and souces all contributes to water intake and the alcohol will dehydrate but the impact is negligible and for the instance conclusion hydrating impacts of climate change and behaviour related to the necessity of drinking water,lager , coffee and the tea are found identical .

MAKE SURE TO HAVE ENOUGH LIGHT AND THE DECOR RIGHT NOOK AT HOME

W0RK FROM HOME :--Now a days work from home has become the necessitated necessity of the students,as well as the other concerned due to covid-19 pandemic for which it is necessary to protect the safety measures of the required productivity of the home office maintained in this behalf of the users .If you place your work chair near the window that would provide better light and sufficient amount of vitamin D. As a cramped poorly lit space results in the greater eyes strain and lesser effective output.Having a table lamp or over head light on the ceiling or the wall is the ideal combination to have natural light and the artificial light ,so we may choose both and for an aesthetic touch a tall floor lamp is necessary.  It is necessary to have good productive working desk which could be proved a valuable asset in our WFH space . Studies say that greenery should be introduced near the working desk as they relieve the stress and anxiety while under the working stress