WORKSHOP AND TRAINING EVENT ARRANGED BY THE ACC ON 19-5-2022 AT TALAI DISTT BILASPUR HIMACHAL PRADESH RELATED TO THE THEORY OF PC AND RCC REMAINED SUCCESSFUL AS GUIDING THE NEW ERA ENTRANTS JOINING THE PROFESSIONAL TECHNIQUES (CONSTRUCTION WORK)

Yesterday it was a occasion and time to attend the workshop and training programme of the ACC arranged by the Company senior officers and Engineers to guide the session attended by the various agencies and it's co-ordinator management delegates and for which about 40 trainees were present in the meeting and event .The arrangement was made in the Private Hotel at Talai .The various problems faced by the group coordinators were discussed in the Workshop and training which includes highlights of processing and use of plain and RCC in Structural works and strength of various types of cement used in the state of HP it's test strength observed after 28 days ,methods of Design and working stress and load factor and where it is suggested to use the good qualities of materials like cement steel bricks sand and water so that required strength of the infrastructure may be obtained from the system of theory of the RCC based on the design parameters laid by IS 456 and the BIS .It was also made known to the trainees that both PC and the RCC could not be ignored as per Design and scope of the Structural evaluation as such by inserting steel bars in the bottom of the beam to take the tensile stress , the beam is made ten times as strong as plain beam .Volume for volume steel costs about 60 times as much as concrete and for the same cross section steel resists about 280 times as much in tension and 28 times as much in compression as concrete. Therefore ,a combination of concrete and steel makes for the economy and good design outlook of the structure .