PANCHAYATI RAJ DEPARTMENT RESPONSIBLE TO PROVIDE DRAWINGS AND THE DESIGN & SCOPE OF EVERY SCHEME AND WORK BEFORE THE TECHNICAL SANCTION.

REQUIREMENTS OF DRAWINGS AND DETAILING PRESCRIBED BY THE CODE AND SPECIFICATIONS :--The drawings shall be read with architectural job and  the conversation made ,as required for the necessary provision under state of the serviceability.(2) Requirements of various architectural features shall be ensured  (3) Any discrepancy,if noticed may be brought to the notice of the higher authority (4) Reinforcement shall be ribbed tor steel ,ie cold twisted deformed bars having high yield strength (Fc 415) , conforming to IS: 1786-1985 .(5) Grade of concrete shall be not less than M -15 and actual design mix will be done before starting the work. The characteristics compressive strength of the grade of concrete shall be verified ,as laid down in IS:456-2000.(6) Concrete shall be mixed mechanically and Appropriate measures of the compaction shall be observed and ensured by using the vibrator (7) During the execution of the work at site of work all requirements laid down by the IS:456-2000 must be complied with strictly.(8) The Engineer in Incharge working for the specification laid down under code and specifications must ensure that the drawing prescribed by the department does not violate the provisions of the codal requirements as well as the agreement. In case of any deviations necessary approval anticipated and required for the good governance and accountability must be brought to the notice of the competent authority in the interest of transpancy and amendments in original documents of the scheme/ project /work to be completed by the contractor /agency deputed for the execution.